What Should be Pay Attention When Packing the Escalator/Moving walk?

What Should be Pay Attention When Packing the Escalator/Moving walk?
CONAI Escalator from 2017-11-29

A good way to packing the completed escalator&Movingwalk can increase your profit. Make your customer feel good and want to order again. Don't know what need noticed when packing the completed escalator and moving walk? No worries, let me introduce all the things to you.

 

1 . Escalator /Moving walk packaging and transportation process

1.1  Make sure the equipment is out of power before packing  

1.2  Packing must be used for fixed armrests with special glass support.

1.3  Equipment must be packed in special rainproof and waterproof membrane to prevent dust pollution during transportation.    

1.4  Before the crane, check whether the use of the sling and the sling meets the safety requirements.

1.5  Hoisting personnel must have operation certificate.

1.6  Make sure truss balance before lifting truss and check whether the hoisting condition meets safety requirements.

1.7  Hoisting escalator and automatic walkway, the moving crane in the middle of the hoisting process causes the two parts of truss to slide slowly out of the truss.

1.8  When the truss is in a hoisting mode, ensure that all personnel are kept in the perpendicular distance of the sidewalk, and outside the truss direction.

 

2 . Escalator /Moving walk packaging station cover plate packaging process

2.1    Packing requirement.

2.2    The transport bracket shall be installed in the line segment of the sidewalk.

2.3    Aglass clamping piece between the two stands is installed in the u-shaped material and fixed with a glass clamp. 

2.4    After removing the inside cover, the fixed block of the transport bracket and the plastic liner are inserted in to the u-shaped material, and the nut of the clamp is tightened.(photo caption)

                                                                              Escalator Manufacturer, Completed Escalator Supplier, Escalator Manufacturer                                                                                                                                                  Escalator Manufacturer, Completed Escalator Supplier, Escalator Manufacturer    

2.5  Place two rear cover pads on the brackets.

2.6  The cover shall be close to the surface of the bracket.

2.7  Each of the four corners of the cover shall be fixed with the cover plate and the front and rear transport brackets.

2.8  Cut off the extra belt (note: 2 to 3CM). (photo caption) 

                                                                                 Escalator Manufacturer, Completed Escalator Supplier, Escalator Manufacturer                                                                                                                                                  Escalator Manufacturer, Completed Escalator Supplier, Escalator Manufacturer

3 . Escalator /Moving walk packaging station ladder packing process card.

3.1   Packing requirement.

3.2   The handrail is out of the rubber cover.

3.3   The handrail should be symmetrical.

3.4   The entrances and containers are placed between the control cabinet and the host, and the truss is fixed with a rope.

3.5    The main transmission chain smeared with butter. (photo caption)

                                                                                  Escalator Manufacturer, Completed Escalator Supplier, Escalator Manufacturer                                                                                                                                                Escalator Manufacturer, Completed Escalator Supplier, Escalator Manufacturer

3.6   Truss section for butter, package with foam.

3.7   The cascade chain is fixed with a bandage.

3.8   Section of the dismantled cascade chain with foam paper wrap, tape it to the central guide plate. (photo caption)

                                                                                  Escalator Manufacturer, Completed Escalator Supplier, Escalator Manufacturer

3.9    Use the rope to fasten the cascade chain with the truss.

3.10  Use a tie strap to hold the junction box with the cascade chain.

3.11  Arm guide rail placement: the ladder width 600 will be placed on the lower head;The ladder width is 800/1000 and the guide is placed on the stairs. (photo caption)

                                                                                    Escalator Manufacturer, Completed Escalator Supplier, Escalator Manufacturer

3.12   The rail, cover plate, skirt board, u-type guide rail with foam package.

3.13   Tie the armrest guide rail, cover board, skirt board and u-type guide rail with rope securely.

3.14   Fixed the parts and truss with ropes. (photo caption)

                                                                                  Escalator Manufacturer, Completed Escalator Supplier, Escalator Manufacturer

3.15   Automatic escalator and automatic pavement line segment should be guaranteed upper when connecting. The truss is not touching the lower pavement. (photo caption)

                                                                                  Escalator Manufacturer, Completed Escalator Supplier, Escalator Manufacturer

4 . Escalator /Moving walk Special requirement for Export Packing

4.1  Packing labels (including packing material mark and inspection report etc.) need to be used in full English.

4.2  The export ladder is made of aluminum plastic (domestic is the ordinary anti-rain cloth packing bag).

4.3  The packing boxes need plywood and glued wood to meet the fumigation standard. 

Escalator Manufacturer, Completed Escalator Supplier, Escalator Manufacturer

Escalator Manufacturer, Completed Escalator Supplier, Escalator Manufacturer

Escalator Manufacturer, Completed Escalator Supplier, Escalator Manufacturer

 

Previous: Our Partners are Around the World Next: How Many Kinds of Escalators are there?
CONTACT US
 
Room2201-2,Chengnan Business Tower,Shounan Street,No. 115 West,Huifeng Road,Yinzhou Dist.,Ningbo
 
+86 135 8684 8817
 
+86 574 8824 3599
 
+86 574 8902 8502
Product Catalog
Products